Decorative roofing

Special fish-scale roofing (Fischschuppen)

This is a special version of the original fish-scale roofing exclusively designed for wall tiling.

Underlayment

Full-surface sheeting, nailing building panels, nailing masonry.

The shape of the slates

 

Dimensions

Width Height cm Pcs/m2
In case of double- roofing With an overlap of 20mm 		Visible slate-height kg /1000 Pcs Pcs/pallet appr.
40 x 19 29,4 8,5 900 1300
30 x 19 39,2 8,5 700 1600
25 x 19 47,1 8,5 560 2000
22 x 15 69,9 6,5 435 3000
20 x 15 76,9 6,5 370 3000

Overlap
Fish-scale slates are laid bonded. The head lap varies depending on the size of the slate and its straight side which will be in complete coverage. The special fish-scale slates have a minimal double head lap of 2 cm.

Rake and ridge
Slates on a straight rake can be laid bonded. The ridge can be tiled with ridge slates of different sizes.

Standard and rhombus slates (French) Spitzwinkel
In case of roofing with standards slates (French) the slates are laid bonded. The techniques of the slating is the same as the 40x40 standard slate roofing that is well-known in Hungary.

Underlayment
Full-surface sheeting, nailing building panels, nailing masonry.

The shape of the slates

 

Dimensions

Nr. Dimensions
Width/Height 		Minimal roof angle Overlap in mm Appr. Pcs/m2 on roof kg /1000 Pcs Pcs/pallet appr.
1 47 x 31 > 30° 107 18,3 1475 800
2 43 x 29 > 30° 107 22,0 1046 1100
3 38 x 25 > 30° 107 30,4 837 1400
4 36 x 24 > 45° 95 32,7 738 1600
5 33 x 21 > 45° 73 38,6 596 2000
6* 30 x 20 > 60° 73 46,1 529 2200
7* 29 x 19 > 60° 73 50,9 468 2500
8* 26 x 18 > 60° 73 62,8 409 3000
9* 24 x 15 > 60° 60 78,4 316 3800
10* 21 x 13 > 60° 48 101,2 230 5000

Overlap
The minimal size of the head lap depends on the size of the trimmed corner and the overhanging top. It has to overhang 0.5 cm in case of a 40o or higher pitch and 1 cm in case of a pitch lower than 40o. It does not have to overhang on walls.

Wall tiling

Special alveolar tiling (Wabe-deckung)
Rectangular slates for wall tiling with a trimmed vertex.

Underlayment
Full-surface sheeting, nailing building panels, nailing masonry.

The shape of the slates

Dimensions:

Alveolar slates are available only in a size of 20/20 cm.
They are exclusively used on walls.

Rake tiling
In case of right or left-positioned tiling, as bonded or overlaid edge. In the case of the actual alveolar tiling as an overlaid edge where the overlaid edging slate hangs at least 4 cm over the the coverage or a straight rake as a bonded edge.

Spacing
1. In case of right or left-positioned tiling, taking the 4 cm wide head and side laps into account.
2. On alveolar slating:
- horizontal spacing: 8,48 cm
- vertical spacing: 28,28 cm

There are 30/20 and 40/20 cm rectangular (Rechtek) slates for the edges